Sharp PN-L401C Operation Manual page 56

n View
(1)
(2)
(3)
(4)
(5)
(6)
(1) Mode when whiteboard is started (Full version only)
Set whether the mode when the whiteboard opens is "Full Screen" or "State when last closed".
(2) Move Overlay board to front (Full version only)
Set whether the overlay board is always at the front.
(3) Show icon to be restored from minimize (Full version only)
Set "On" or "Off".
When set to "On" and the software is minimized (page 7), the icon (
the icon to return to full screen display.
(4) Show soft keyboard when entering text
Set "On" or "Off".
If you are using Windows 10 Anniversary Update or later, this setting will not appear. The soft keyboard setting depends on
the operating system.
(5) Mouse cursor
Set whether to show a cursor.
(6) Show the grid lines
Set "Show" or "Hide".
(7) Grid Interval
Set the grid interval. (50 to 500 pixels)
(8) Scale down large images
When set to "On", large images will be automatically compressed before being acquired. When set to "Off", large images
will be acquired without being compressed.
(9) Zoom ratio when sheet is opened
Change the magnification used to display files that are opened.
(10) Sheet Expansion Gesture
When set to "Enable", you can gesture to move the position of a sheet beyond the sheet edge. In addition, you can flick
horizontally to move a sheet even when the magnification is not Fit Width.
If you do not want the view to go beyond a sheet by gesture, set to "Disable".
(7)
(8)
(9)
(10)
) will appear for restoration from minimize. Touch
56
E