Drawing With A Pen - Sharp PN-L401C Operation Manual

Changing sheet size with the sheet expansion gesture
When "Sheet Expansion Gesture" is "Enable" (page 56), you can enlarge the sheet size by directly touching
bottom, or side of the sheet. (Max. 3840 x 2160)
Reduction of the sheet size is not possible.
1. Drag the sheet with two fingers to show the edge of the sheet you want to enlarge.
When the edge comes into view,
2. Touch .
The sheet enlarges in the direction of the

Drawing with a Pen

1. Touch one of "Pen 1" to "Pen 3" in the menu.
2. Draw on the board with the touch pen.
The drawn shape will be determined as an object 0.5 second* after you lift the touch pen from the board. If you start drawing
another object within 0.5 second* after you lift the touch pen from the board, the drawn shapes will be determined to be a single
object even though they are separate.
* This period can be changed. (Page 58)
Draw a shape.
TIPS
• You can switch through "Pen 1" to "Pen 3" and "Eraser" by repeatedly pressing Function Button 2 of a 2 button pen.
To change functions using Function Button 2, select the touch panel driver "Properties", and set "Function Button 2" to "Pen
Software Link" on the "Operation Setting" tab.
When using 3 button pen, you can switch through "Pen 1" to "Pen 3" and "Eraser" by repeatedly pressing Function Button. To
use this function, set "Pen Software Link" to any function button on "Function Buttons" on "Advanced" in Touch Pen Utility.
• For details about objects, refer to page 33.
• In certain cases, such as when an icon on the menu is touched, the drawn shape will be fixed as an object before the
specified time elapses after the touch pen is lifted from the board.
• When "Touch Pen" is set to "Finger mode enabled", you can draw with your finger. (Page 52)
appears as shown.
you pressed.
Less than
0.5 second
Draw another shape.
25
E
After
0.5 second
Both shapes are determined
as a single object.
at the top,