Editing An Object - Sharp PN-L401C Operation Manual

Editing an object

The drawn lines and the images pasted on the board are handled in the software as an "object".
n Selecting an object
You need to select an object before editing it.
1. Touch "Rectangle Selection" or
2. Touch an object.
The object is selected and the expansion menu appears.
Touch an object.
Touch an area where
something is drawn. You
cannot select an object by
touching the area where
nothing is drawn.
n Selecting an object with your finger
When using an active pen with "Touch Pen" set to "Draw with Active Pen Only" in the "Basic Settings" and "Select with Finger in
Pen mode" set to "Enable", you can select an object by touching it with your finger.
"Lasso Selection" in the menu.
Select point
Selected object
The area of the object is
indicated with a dotted line,
and symbols called select
points appear on the vertices
and sides of the area.
E
The following editing operations can be performed in
the expansion menu.
• Cut
• Copy
• Duplicate
• Delete
• Rotate
• Convert to Text (handwritten characters only)
• Web Search (texts/handwritten characters only)
• Order
• Group
• Ungroup
• Trimming (images only)
• Properties (excluding images)
33