Sharp PN-L401C Operation Manual page 55

To change default setting of each active pen
This can only be changed when "Input mode" of the Touch Pen Utility is set to "Standard" or "Pen".
(1) Select the "Change default setting of each 3 button pen." checkbox.
• Set "Menu" to "Square Menu" and "Touch Pen" to "Draw with Active Pen Only". (Page 52)
If these settings are not correct, an error message will appear.
(2) Click "Settings for each active pen".
• The "Settings for each active pen" screen appears.
(1)
(3) Click the Pen Number of the pen that you want to set.
• To automatically select the Pen Number of the currently used pen, press the "Auto Select" button.
(4) Set the default settings for "Pen 1" to "Pen 3" and "Eraser".
TIPS
• Change default setting of each active pen is only enabled for 3 button pens.
• If you change the "Menu" or "Touch Pen" setting after changing the default settings, the checkmark will be removed from the
"Change default setting of each 3 button pen." checkbox.
55
E
(2)