Using A Secondary Display (Full Version Only) - Sharp PN-L401C Operation Manual

Using a Secondary Display (Full version only)

Applicable models (as of February 2017)
PN-L series ( PN-L401C/PN-40TC1/PN-L602B/PN-L603A/PN-60TA3/PN-L603B/PN-60TB3/PN-L603W/PN-60TW3/PN-L702B/
PN-L703A/PN-70TA3/PN-L703B/PN-70TB3/PN-L703W/PN-70TW3/PN-L802B/PN-L803C/PN-80TC3)
PN-C series (PN-C603D/PN-C703B/PN-70SC3/PN-C705B/PN-70SC5/PN-C805B/PN-80SC5)
LL-S series (LL-S201A/LL-S242A)
LL-P series (LL-P202V)
Available models differ according to region.
Caution
• Set the screen resolution to 1920 x 1080.
• PN-L602B/PN-L702B/PN-L802B:
Set "Touch Mode Setting" of the touch panel driver to "Dual".
PN-L603A/PN-60TA3/PN-L603B/PN-60TB3/PN-L603W/PN-60TW3/PN-L703A/PN-70TA3/PN-L703B/PN-70TB3/PN-L703W/
PN-70TW3/PN-L803C/PN-80TC3:
Set "Touch Operation Mode" of the Touch Panel Settings Tool to "Multi-Touch Mode".
• The software keyboard for text entry may not appear in the display that shows Pen Software. In Windows 7, the software
keyboard cannot be displayed in a secondary display.
• An external application (page 43) launched from the Pen Software may appear in the primary display.
n Secondary display settings
To use the touch panel in the secondary display, touch panel settings must be configured.
1. Connect the display to the external display port on the computer, and connect to the display with a USB cable.
2. Select "Hardware and Sound" from Control Panel.
3. Select "Tablet PC Settings".
4. Select "Setup".
5. Press the [Enter] key until the screen below is shown as the secondary display.
If the pen or touch input selection screen appears, select touch input.
6. Touch the screen.
7. Press "OK".
"Tablet PC Settings" closes.
50
E