Table of Contents
Advertisement
• If the time is set incorrectly, reset the time.
• If measurement stops while exercising, you may be moving slowly. In this case, turn off the AT Pause
setting.
• If heart rate measurement stops, check to make sure that you are wearing the watch correctly. If your
body surface is cold, cover your wrist with clothing or wipe sweat away beneath the watch to stabilize
heart rate measurement.
Parent topic:
Solutions to GPS Signal Problems
If you experience problems acquiring or maintaining a GPS connection, try the following solutions:
• If you cannot locate a GPS signal, take the watch outdoors for at least 15 minutes. Make sure there
are no overhead obstructions, stand still, and try acquiring a GPS signal again. The GPS signal may
be interrupted by tall buildings, tall trees, or mountainsides, so try to move into as open an area as
possible.
• Make sure your watch is paired with your smartphone. Your watch will automatically download your
GPS location information from your smartphone.
• If you still cannot acquire a signal, select Skip on the GPS screen to start your workout. Distance
traveled will be estimated based on your stride until the GPS signal is fully acquired.
Parent topic:
Related tasks
Acquiring a GPS Signal
Solving Problems Using Epson View
Check the solutions in these sections if you have any problems using the Epson View app on your
smartphone.
Solutions to Problems Using Epson View
Parent topic:
Solving Problems Using Your Watch
Solving Problems Using Your Watch
Solving Problems
70
Advertisement
Table of Contents
