Setting Gps (Gps Search) - Epson AP002 User Manual

Chapter 1
Getting Ready

1-6 Setting GPS (GPS search)

When changing to each measurement function for chronograph, exercise, and
interval, the device receives a signal from the GPS and assigns a GPS to be used for
measurements (GPS search).
While performing a GPS search, make sure you are outside with no obstructions
overhead, and try to keep the device as still as possible.
This section explains how to perform a GPS search using the chronograph function as an
example.
Press to display the [Menu].
1
Use /
2
The [Searching] screen is displayed. When the GPS search is complete, the
chronograph screen is displayed.
For a more accurate measurement the first time you use the device, display
the chronograph screen while you are outside for at least 15 minutes with no
obstructions overhead before performing a GPS search.
You do not need to make these preparations from the second time. You need to
make these settings again if the system is reset.
to highlight [Chronograph], and then press
24
.
Chronograph screen