Sfp Support; Table 5 Sfps For The 8-Port Ethernet Adapter Card And 8-Port Gigabit Ethernet Adapter Card - Alcatel-Lucent 7705 Installation Manual

Installing and Removing SFPs

SFP Support

Table 5
8-port Gigabit Ethernet Adapter card.
Table 5: SFPs for the 8-port Ethernet Adapter Card and 8-port Gigabit Ethernet Adapter Card
Part Number Short
Description
3HE00062AA PBA GigE TX
SFP Copper
Module
(1000Base-T)
Category 5, 10/
100/1000 Mb/s
3HE00062CB PBA GigE TX
SFP Copper
Module
(1000Base-T)
Category 5, 10/
100/1000 Mb/s
3HE00027AA PBA GigE SX
SFP Optics
Module - LC
(1000Base-SX)
3HE00027CA GigE SX SFP
ROHS-6/6
Optics Module -
LC - DDM
38
lists the Alcatel-Lucent approved SFPs for the 8-port Ethernet Adapter card and the
Note: The operating temperature ranges listed in
The ambient temperature outside the 7705 SAR will influence the SFP case temperature,
depending on which chassis the SFP is installed in. The maximum system inlet ambient
temperature to SFP temperature rise is as follows:
• up to 10° C for the 7705 SAR-F
• up to 15° C for the 7705 SAR-M
• up to 20° C for the 7705 SAR-8, version 1
• up to 10° C for the 7705 SAR-8, version 2
Ensure that the SFP to be installed supports an operating temperature range that
accommodates the expected temperature rise inside the chassis.
Media
Copper
Copper
Fiber
Fiber
7705 SAR Ethernet/Gigabit Ethernet Adapter Card Installation Guide
Table 5
Wave- Connector
length Type
N/A RJ-45
N/A RJ-45
850 nm LC
850 nm LC
are for the SFP case temperature.
Distance Operating
Temp.
100 m 0° to 85° C
(32° to
185° F)
100 m -40° to
85° C
(-40° to
185° F)
550 m -20° to
85° C
(-4° to
185° F)
550 m -40° to
85° C
(-40° to
185° F)
SyncE
No
No
Yes
Yes