Samuel Ch ´ ereau This manual is written without any warranty. Maestro Wireless Solutions Ltd. reserves the right to modify or improve the product and its accessories which can also, be withdrawn without prior notice. Besides, our company stresses the fact that the performance of the product, as well as accessories, depend not only on the proper conditions of use but also on the environment around the places of use.
Page 4
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
5.2 Using the Maestro Configuration Software ........
Page 6
8.6 Failsafe factory reinstall using USB Binary Update Tool ......Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd.
– Do not pull the antenna or power supply cable. Please attach or detach by holding the connector. – Connect the modem only according to the instruction manual. Failure to do it will void the warranty. Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
Page 8
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
– R7.50 should be upgraded as quick as possible to avoid any memory corruption and crashes. Starting in October 2017 all production of M1003G will be using R7.54.2 firmware and latest version of Smart- Pack. Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
Page 10
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
– 4 pin power supply connector with DIO – SMA Cellular antenna connector (50 ) – mini-USB Female port – SMA GPS antenna connector (50 ) Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
Hazardous Location: – In some states and provinces, The Maestro 100 3G is classified to ANSI/ISA 12.12.01-2013 and CSA C22.2 No 213- M(1987)(R2013) and are suitable for use in Class 1, Division 2, Groups A, B, C and D with ambient temperature range -30°C...
Page 13
– Each M100 3G in single plastic bag without any accessories – Overall size: 522 mm x 212 mm x 150 mm – Weight: 4.3 kg Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
Page 14
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
Chapter 3 Related documents This document presents technical and hardware specifications of the Maestro 100 3G industrial modem. It covers a hardware installation, quick start guide, accessories listing and troubleshooting details. This document will not cover the embedded application details, neither the common 3GPP AT command list, for more information please refer to the following documentation available on our website: –...
Page 16
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
Note: Make sure to install GSM and GPS antennas with an angle of at least 90º to avoid disturbance. Refer to the drawing on Figure 4.3.1 on the next page. Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
4.4 Connecting the modem to external device Use Maestro standard DB15 to DB9 straight cable, detailed on page 28, or a common USB to mini-USB cable, to connect an external controller or a computer. Refer to section 6.2 for more details on some other cable option or adapter.
Page 19
Figure 4.5.2: Side view showing power and serial connector Note: Modem can also be powered and connected by USB only using the ACC-CA41 Maestro ’X’ Cable as detailed in 6.2 on page 28. Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd.
Page 20
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
If modem reply to AT+VAFV command it will automatically switch the window to the “Modem Status” page and if it only reply to AT command the window will switch to “Terminal” page. 3. Update your modem: use this tool to upgrade your modem, that handle both firmware and latest Maestro application.
Page 22
(RSSI, refreshed every five seconds), your SIM card network name, as well as the revision number for the embedded application and firmware. Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
Page 23
– GPS for M100 3G XT (will be added by Q4 2013). The last and not least page of the Maestro Configuration Software is the Terminal, which is a Windows HyperTerminal replacement with log, quick command features, see Figure 5.2.3.
Page 24
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
– GPS SMA female connector: fits active or passive GPS antenna with impedance of 50 . Note: Make sure to install GSM and GPS antennas with an angle of at least 90º to avoid disturbance. Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
16 mA Speaker impedance Please refer to the document ”Application note - Power supply & Audio” for more information about audio connection. Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
– If used to control relay, a protection diode needs to be added in parallel of the relay coil to avoid current peak when triggered. Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
Power cord with fuse - ACC-CA10 – 4-pin Microfit connector – 1 m AWG20 cables with stripped wire end – 2.5 A glass fuse with plastic holder Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
Page 29
– SPCC steel – Thickness: 1.2 mm DB15 to DB9 adapter - OTH-004 – Plastic molded with screws – Length: 36 mm (w/ connector) Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
Page 30
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
/! Important notice: This section concern only OpenAT developer that will need to control GPIOs from their application, else the Maestro SmartPack will control GPIOs through SmartPack AT commands. Inputs are mapped in OpenAT to: GPIO01 for DIO1, GPIO03 for DIO2.
Page 32
Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
8.4 No voice could be heard for the modem’s speaker output when a call is answered – Make sure a voice call has been made (refer to AT command guide) – Enter the AR+SPEAKER=2 command Confidential, the whole document is the sole property of Maestro Wireless Solutions Ltd. Please contact us on support.maestro-wireless.com...
8.6 Failsafe factory reinstall using USB Binary Update Tool In case your modem firmware is crash or can’t be flash via Serial port, Maestro Wireless can provide a binary update tool using USB, please contact support@maestro-wireless.com to receive those files.
Need help?
Do you have a question about the 100 3G and is the answer not in the manual?
Questions and answers