KVM over IP Matrix System User Manual
System
The System tab allows you to configure the User Station's general settings:
Item
Device
Information
Reboot
User Station
Password
Change
After entering the information, click Save.
56
Enter the Name, Location, and Description of the User
Station. It also displays the IP Address, MAC Address, F/W
Version, Serial Number, and Model Number of the User Station.
Check the box and click Reboot to reset the User Station's
settings back to the factory default. All custom settings will be
lost.
Check Enable to require a password for access to the User
Station's OSD configuration screen. Enter the Old Password,
enter a New Password, and confirm the new password in the
Confirm Password box.
Description