Table of Contents
Advertisement
Problem
Supply does not
calibrate properly.
C o m m o n E r r o r s
The following is a list of common printer errors you may
receive. If you receive a message not listed here, see
your System Administrator or call Technical Support at
the number listed on the back of this manual.
Error
025
Invalid Length
101
Invalid/Missing
409
Memory Full
410
Parity
411
Framing
413
Overrun
611
Error Loading
612
Invalid Data
613
Invalid Data
614
Invalid Data
4-2 Troubleshooting
Solution
Check the on-demand, black mark,
die cut, or non-indexed sensors.
Refer to the System
Administrator's Guide for more
information. You may need a new
sensor.
Description
String length is outside the range 0 to
2710.
The format referenced by batch is not in
memory.
The printer memory is full. Delete
unnecessary formats or graphics from
memory.
Parity mismatch. Check your parity
settings at the printer and at the host.
Framing error (baud rate mismatch).
Check your baud rate settings at the
printer and at the host.
Online receive queue is full. Check for a
flow control problem.
Font, bar code, or density in the batch
does not fit the format.
The data in this line of the batch is either
missing or does not match the format.
Reference point off supply.
Portion of field off supply or there may be
an invalid character in the packet.
Advertisement
Table of Contents
