Table of Contents
Advertisement
Use any of the following items to clean the printhead:
N
A soft cloth moistened with isopropyl alcohol.
Use isopropyl alcohol on the interior areas only,
N
A Monarch Cleaning Pen (part number 114226).
To clean the printhead, platen roller, and supply sensors:
1. Turn off the printer by pressing and holding the P
button until the display is blank.
Do not use sharp objects to remove
adhesive or label particles from the
2. Open the supply door by pushing down on the
release buttons on both sides of the printer. The
supply door should swing open.
Release
Button
3. Lay the printer on its back.
3-2 Care and Maintenance
CAUTION
never on the exterior.
printhead area.
Advertisement
Table of Contents
