L O A D I N G S U P P L I E S
This chapter describes how to load supply for
N
non-peel mode (prints on continuous strip of supply).
N
peel mode (prints and separates the label from the
liner).
Loading tips:
N
Whenever you open and close the supply door,
press the O button to calibrate the supply under the
printhead.
N
The printer may be on or off when loading supplies.
L o a d i n g f o r N o n - P e e l M o d e
Use these instructions to load labels, tags, receipt
paper, and linerless labels (supply without a liner). To
print linerless labels, the printer needs to be setup with
the linerless platen roller.
1. Open the supply door by pushing down on the
release buttons on both sides of the printer. The
supply door should swing open.
Release
Button
Loading Supplies 2-1
2