Table of Contents
Advertisement
Deleting a Paired Phone
1. Press the
button.
2. Say "Bluetooth."
3. Say "Delete." The system asks which phone to delete.
4. Say the name of the phone you want to delete.
If the phone name you want to delete is unknown, see "Listing All Paired and
Connected Phones" on the previous page.
26
Connecting to a Different Phone
To connect to a different cell phone, the Bluetooth® system looks for the next
available cell phone in the order in which all the available cell phones were paired.
Depending on which cell phone you want to connect to, you may have to use this
command several times.
• Press the
button.
• Say "Bluetooth."
• Say "Change phone."
• If another cell phone is found, the response will be "<Phone name> is
now connected."
• If another cell phone is not found, the original phone remains connected.
Call Waiting
Call waiting must be supported on the cell phone and enabled by the wireless
service carrier.
• Press the
button to answer an incoming call when another call is active.
The original call is placed on hold.
• Press the
button again to return to the original call.
• To ignore the incoming call, no action is required.
• Press and hold the
button for more than 2 seconds to disconnect the
current call and switch to the call on hold.
Transferring a Call
Audio can be transferred between the Bluetooth® system and the cell phone.
The cell phone must be paired and connected with the OnStar system before a
call can be transferred. The connection process can take up to two minutes after
the car ignition is turned to ON/RUN.
To Transfer Audio Between the OnStar
System and a Cell Phone
Use the audio transfer feature on the cell phone, if available. See your cell phone
manufacturer's user guide for more information.
27
Advertisement
Table of Contents
