Pairing A Phone - OnStar liveon Owner's Manual

Bluetooth®
Connected and In Control.
OnStar offers Bluetooth® technology,
making it easy to stay connected,
safe and able to talk hands-free while
on the road.
• Your OnStar system is equipped
with Bluetooth. ® This allows you
to make and receive phone calls
hands-free using a Bluetooth®-
capable cell phone.
• Not all phones support all functions,
and not all phones are guaranteed
to work with Bluetooth.® Visit
www.onstar.com to see if your
phone is compatible.
• The OnStar system uses voice
recognition to interpret voice
commands to dial phone numbers
and name tags.
• Use the OnStar system's volume
buttons during a call to change the
volume level.
• The range of the Bluetooth® signal can be up to 10 meters.
• For additional information, say "Help" while you are in a voice recognition menu.
Pairing
WARNING: The use of a hand-held cellular device while driving may be against
the law in some states, counties, cities or townships. Please consult your local
ordinances to determine restrictions in your area. A Bluetooth® cellular phone must
be paired and connected to the OnStar system before it can be used as a hands-
free device. Please see your cellular phone manufacturer's user guide for Bluetooth®
functionality prior to pairing a cellular phone to the OnStar system. If a Bluetooth®
device is not paired and connected to the vehicle, Hands-Free Calling through
the OnStar system is subject to available prepaid Hands-Free Calling minutes.
24
Pairing Information
• Up to five cell phones can be paired to the Bluetooth® system.
• Pairing only needs to be completed once, unless the pairing information on
the cell phone changes or the cell phone is deleted from the system.
• Only one paired cell phone can be connected to the OnStar system at a time.
• If multiple paired cell phones are within range of the system, the system
connects to the first available paired cell phone in the order that they were first
paired to the system. To connect to a different paired phone, see "Connecting
to a Different Phone" later in this section.

Pairing a Phone

1. Press the button.
2. Say "Pair." The system responds with instructions and a four-digit Personal
Identification Number (PIN). The PIN is used in Step 4.
3. Start the pairing process on the cell phone that you want to pair. For help
with this process, see your cell phone manufacturer's user guide.
4. Locate the device named "Your Vehicle" in the list on the cell phone. Follow
the instructions on the cell phone to enter the PIN that was provided in
Step 2. After the PIN is entered, the system prompts you to provide a name
for the paired cell phone. This name will be used to indicate which phones are
paired and connected to the OnStar system. See "Listing
All Paired and Connected Phones" for more information.
5. Repeat Steps 1 through 4 to pair additional phones.
Listing All Paired and
Connected Phones
The system can list all cell phones
paired to it. If a paired cell phone
is also connected to the OnStar
system, the system responds
with "is connected" after that
phone name.
1. Press the button.
2. Say "Bluetooth."
3. Say "List."
25