STEP
5
Stowing the flat/spare tire, jack and tools
STEP
1
Raise the tire.
STEP
2
Vehicles with kinetic dynamic suspension: Pull the tire towards
the rear of the vehicle when raising. After raising, visually check
that the tire is not interfering with suspension components.
Stow the tools and jack securely, and replace all covers.
STEP
3
After completing the tire change
■
The tire pressure warning system must be reset. (P. 589)
5-2. Steps to take in an emergency
Reinstall the wheel ornament.
Lay down the tire with the outer
side facing up, and install the hold-
ing bracket.
5
669