2-4. Using other driving systems
The four-wheel drive control switch can be operated when
■
The "ENGINE START STOP" switch is in IGNITION ON mode.
●
The shift lever is in the "N" position.
●
The vehicle is stopped completely.
●
The low speed four-wheel drive indicator light
■
The indicator light blinks while shifting between "H4" and "L4".
Advice for driving on slippery roads
■
If you shift the four-wheel drive control switch to "L4" and the shift lever to the
●
"2" range of "S" while driving in steep off-road areas, the output of the brake can
be controlled effectively by the active traction control system, which assists the
driver to control the driving power of 4 wheels.
Use the "1" range of "S" of the shift lever for maximum power and traction when
●
your wheels get stuck or when driving down a steep incline.
The center differential lock indicator light
■
The indicator light blinks while locking/unlocking the center differential.
The center differential lock/unlock button can be operated when
■
The "ENGINE START STOP" switch is in IGNITION ON mode.
●
The vehicle speed is less than 60 mph (100 km/h).
●
258