WAGO smartPRINTER Operating Instructions Manual page 39

smartPRINTER Operating Instructions
[Port Number] 09100 must be entered here. Press the right-hand button on the directional pad and
navigate to [DHCP].
Changing the values entered
The procedure for the following menu items is identical when changing values.
Press the bottom button of the directional pad, [Settings]. A red line appears under the first digit.
You can change the value of the underlined digit by pressing the top or bottom button of the
directional pad.
Pressing the left or right button of the directional pad moves to the next digit.
Pressing the Enter button saves the entry and exits the input area.
[DHCP] The default setting is "DHCP active." Press the bottom button of the directional pad. [DHCP]
now appears on the display in a black bar as well as [activate]. Press the bottom button of the
directional pad. [deactivate] now appears on the display. Press the Enter button and save the setting.
Press the right-hand button on the directional pad and navigate to [Standard Gateway].
Press the right-hand button on the directional pad and navigate to [Standard Gateway].
[Standard Gateway]: Enter the address of the standard gateway.
Press the right-hand button on the directional pad and navigate to [Static IP Address].
39
smartPRINTER Operating Instructions 003/10.2017