Print Materials; Label Roll Storage; Storage Of Markers/Wmb Inline; Storage Of Marking Strips - WAGO smartPRINTER Operating Instructions Manual

smartPRINTER Operating Instructions
6.5

Print Materials

The requirements placed on the print materials necessitate proper storage. Deficiencies in storage
affect the product properties and print quality and lead to faster wear of the print head.
Following the general storage instructions is the basis for optimal print quality.
Read the handling instructions for the selected print material.
They contain product-specific software and hardware settings.
You can find the handling instructions at:
Only use print materials from the WAGO product portfolio.
Only these products have been comprehensively tested and optimized for use with the
smartPRINTER and the printing software.
6.5.1

Label Roll Storage


Store the label rolls lying flat one on top of the other.

Store the label rolls in their original packaging until processing.

Avoid pressure on the label rolls that could lead to deformation of the rolls.

Protect the label rolls against sunlight and heat exposure. Do not store the label material in
the immediate vicinity of heat sources like heaters.

Store the label rolls at a temperature between 10 °C and at most 18 °C and relevant humidity
>= 50 %, non-condensing.
These environmental conditions prevent the adhesive from leaking or hardening prematurely.

Store label material that has not been processed completely in polybags until further
processing. This prevents excessive moisture absorption of the print material.
6.5.2

Storage of Markers/WMB Inline


Store the markers in their original packaging until processing.

Protect the markers against sunlight and heat exposure. Do not store the markers in the
immediate vicinity of heat sources like heaters.
6.5.3

Storage of Marking Strips


Store the marking strips in their original packaging until processing.

Protect the marking strips against sunlight and heat exposure. Do not store the marking strips
in the immediate vicinity of heat sources like heaters.

Store label material that has not been processed completely in polybags until further
processing. This prevents excessive moisture absorption of the print material.
smartPRINTER Operating Instructions 003/10.2017
www.wago.com/smartprinter
17