WAGO smartPRINTER Operating Instructions Manual page 32

smartPRINTER Operating Instructions
Fig. EA4

Pre-assembled external unwinder.
Fig. EA5

Use the clamping screw to screw the left and right sub-assemblies together.
The external unwinder is ready for use with the smartPRINTER.
Fig. EA6

The external unwinder is set up behind the smartPRINTER.

The external unwinder is set up on the same level as the smartPRINTER.
Important: The external unwinder with the print material on the roll is positioned to allow the
print material and material that runs through the printer in an imaginary line.
smartPRINTER Operating Instructions 003/10.2017
Fig. EA4
Fig. EA6
32
Fig. EA5