Table of Contents
Advertisement
System Setup
Prior to removing the chassis cover, make sure the unit's power is off and
disconnected from the power sources to prevent electric shock or system
damage.
To fully disengage the power to the unit, please disconnect the power cord from
the AC inlet
Avant de retirer le capot du châssis , assurez-vous que la puissance de
l'appareil est éteint et déconnecté de la source d'alimentation pour éviter
un choc électrique ou d'un système de dégâts.
Pour dégager pleinement la puissance à l'unité , s'il vous plaît débrancher
le cordon d'alimentation de la prise secteur
System setup and use in different environment. In normal use condition,
System button IO is toward to ground for better system performance. In
which means system usually install where panel face to user.
CONFIDENTIAL: The information contained herein is proprietary and confidential information of Barco.
be disclosed in any form or by any means and/or stored in a data base or retrieval system without the prior written consent of Barco and/or used for any
purpose other than authorized by Barco.
Interactive Patient Care – Barco Healthcare Division
Replace SATA Disk
1. Loose the screw of HDD service door.
2. Remove current SATA and replace with new one.
No part of the information contained herein may
Advertisement
Table of Contents
