Espa SPEEDRIVE Instruction Manual page 14

DISPLAY OF THE ALARM LOG DISPLAY OF THE ALARM LOG DISPLAY OF THE ALARM LOG DISPLAY OF THE ALARM LOG
From any screen, tap OK to return to the main screen 2.1 From any screen, tap OK to return to the main screen 2.1
From any screen, tap OK to return to the main screen 2.1 From any screen, tap OK to return to the main screen 2.1
DISPLAY OF THE OPERATION LOG DISPLAY OF THE OPERATION LOG DISPLAY OF THE OPERATION LOG DISPLAY OF THE OPERATION LOG
DIFFERENTIAL PRESSURE DIFFERENTIAL PRESSURE
DIFFERENTIAL PRESSURE DIFFERENTIAL PRESSURE
Difference between the set and start-up pressure.
For ex. : 3 bars set – 0.5 bars differential = 2.5 bars start-up
MAXIMUM MOTOR CURRENT MAXIMUM MOTOR CURRENT MAXIMUM MOTOR CURRENT MAXIMUM MOTOR CURRENT
Maximum configured current/ Present current
STOP FREQUENCY STOP FREQUENCY STOP FREQUENCY STOP FREQUENCY
Stop frequency of the inverter / Present output frequency
STOP DELAY STOP DELAY
STOP DELAY STOP DELAY
Timing before a stop.
MODULE TEMPERATURE MODULE TEMPERATURE
MODULE TEMPERATURE MODULE TEMPERATURE
Current temperature of the module or circuit.
DISPLAY ALARMS DISPLAY ALARMS DISPLAY ALARMS DISPLAY ALARMS
Press OK OK OK to confirm. OK
To display the log, press ◄ (Hist)
To display the parameters, press ► (Param)
OVERCURRENT OVERCURRENT OVERCURRENT OVERCURRENT
Number of times an overcurrent is detected.
(see Section 6)
SHORT SHORT SHORT SHORT- - - - CIRCUIT CIRCUIT CIRCUIT CIRCUIT
Number of times a fault caused by a short-circuit is detected.
(see Section 6)
VOLTAGE VOLTAGE
VOLTAGE VOLTAGE
Number of times the inverter has stopped due to a voltage fault.
(see Section 6)
MODULE TEMPERATURE MODULE TEMPERATURE
MODULE TEMPERATURE MODULE TEMPERATURE
Number of times the inverter has stopped due to excess temperature in the
module.
(see Section 6)
LACK OF WATER LEVEL IN TANK LACK OF WATER LEVEL IN TANK LACK OF WATER LEVEL IN TANK LACK OF WATER LEVEL IN TANK
Number of times the inverter has stopped by activating the probe level.
(see Section 6)
DISPLAY LOG DISPLAY LOG DISPLAY LOG DISPLAY LOG
Press Ok to confirm.
To display the alarms, press ► (Alarm)
- 14 -