Beginning With The Ignition Switch In The Off Position; Vehicle Security Alarm; To Arm; To Disarm - Dodge Durango 2017 User Manual

Hide thumbs Also See for Durango 2017:
Table of Contents

Advertisement

Beginning With The Ignition Switch In The OFF Position:

1. Push the ENGINE START/STOP button once to cycle the ignition to the ACC position.
2. Push the ENGINE START/STOP button a second time to cycle the ignition to the
ON/RUN position.
3. Push the ENGINE START/STOP button a third time to return the ignition to the OFF
position.
NOTE:
If the ignition is left in the ACC or ON/RUN
(engine not running) position and the trans-
mission is in PARK, the system will auto-
matically time out after 30 minutes of inac-
tivity, and the ignition is returned to the OFF
position.

VEHICLE SECURITY ALARM

The vehicle security alarm monitors the vehicle doors for unauthorized entry and the
ignition for unauthorized operation. While the vehicle security alarm is armed, interior
switches for door locks and liftgate are disabled. If something triggers the alarm, the
vehicle security alarm will provide the following audible and visible signals: the horn will
pulse, the park lamps and/or turn signals will flash, and the vehicle security light in the
instrument cluster display will flash.

To Arm

Cycle the Keyless Enter-N-Go START/STOP button until the button display indicates that
the vehicle ignition is OFF. Push the power door lock switch while the door is open, push
the key fob lock button, or with one of the key fobs located outside the vehicle and within
5 ft (1.5 m) of the driver's and passenger front door handles, push the Keyless Enter-N-Go
lock button located on the door handle.
NOTE:
After pushing the Keyless Enter-N-Go lock button, you must wait two seconds before you
can lock or unlock the vehicle via the door handle.

To Disarm

Push the key fob unlock button or with one of the key fobs located outside the vehicle and
within 5 ft (1.5 m) of the driver's and passenger front door handles. Grab the Keyless
Enter-N-Go door handle and enter the vehicle, then push the Keyless Enter-N-Go
START/STOP button (requires at least one valid key fob in the vehicle).
G E T T I N G S T A R T E D
Ignition Positions
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents