Trailer Hitch Receiver Cover Removal; Hitch Receiver Cover - Dodge Durango 2017 User Manual

NOTE:
• The trailer tongue weight must be considered as part of the combined weight of
occupants and cargo, and should never exceed the weight referenced on the Tire and
Loading Information placard. Refer to "Tire Safety Information" in "Starting And
Operating" in the Owner's Manual on www.dodge.com/en/owners/manuals for further
information. The addition of passengers and cargo may require reducing trailer tongue
load and Gross Trailer Weight (GTW). Redistributing cargo (to the trailer) may be
necessary to avoid exceeding Rear Gross Axle Weight Rating (GAWR) of 3,900 lbs
(1 769 kg).
• Vehicles not factory equipped with trailer tow package are limited to 3,500 lbs (350 lbs
tongue weight).
Trailer Hitch Receiver Cover Removal — If Equipped
Your vehicle may be equipped with a trailer hitch receiver cover, this must be removed to
access the trailer hitch receiver (if equipped). This cover is located at the bottom center
of the rear fascia.
1. Turn the two locking retainers located at the bottom of the hitch receiver cover a
1/4 turn counterclockwise and pull bottom of the hitch receiver cover outward (towards
you).

Hitch Receiver Cover

1 — Cover Tab Locations
2 — Locking Retainers
U T I L I T Y
195