Table of Contents
Advertisement
O P E R A T I N G Y O U R V E H I C L E
Modes Of Operation
Three selectable modes of operation are available in the Uconnect System. Refer to
"Uconnect Settings" in "Understanding Your Instrument Panel" in your Owner's Manual
at www.dodge.com/en/owners/manuals for further details.
Blind Spot Alert Lights Only (Default Setting)
When operating in Blind Spot Alert mode, the BSM system will provide a visual alert in the
appropriate side view mirror based on a detected object. However, when the system is
operating in Rear Cross Path mode, the system will respond with both visual and audible
alerts when a detected object is present. Whenever an audible alert is requested, the radio
volume is reduced.
Blind Spot Alert Lights/Chime
When operating in Blind Spot Alert Lights/Chime mode, the BSM system will provide a
visual alert in the appropriate side view mirror based on a detected object. If the turn
signal is then activated, and it corresponds to an alert present on that side of the vehicle,
an audible chime will also be sounded. Whenever a turn signal and detected object are
present on the same side at the same time, both the visual and audio alerts will be issued.
In addition to the audible alert the radio (if on) volume will be reduced.
NOTE:
• Whenever an audible alert is requested by the BSM system, the radio volume is
reduced.
• If the Hazard Warning Flashers are on, the system will request the appropriate visual
alert only.
When the system is in RCP, the system shall respond with both visual and audible alerts
when a detected object is present. Whenever an audible alert is requested, the radio
volume is reduced. Turn signal and Hazard signal status is ignored; the RCP state always
requests the chime.
Blind Spot Alert Off
When the BSM system is turned off, there will be no visual or audible alerts from either the
BSM or RCP systems.
NOTE:
The BSM system will store the current operating mode when the vehicle is shut off. Each
time the vehicle is started, the previously stored mode will be recalled and used.
106
- Quick Links:
- Uconnect Access
- Fuses
Hide quick links:
Advertisement
Table of Contents
