Trusted Platform Module; Initializing Tpm - Prestigio Aero 1214 User Manual

Trusted Platform Module

Before setting up the TPM functions you must initialize the security platform.
Backup & Archive
Note that it is very important to perform routine backup and archive procedures. This is the only way to
recover if the TPM fails, the information is cleared or the computer develops a problem. Backup should be
performed to a location other than the computer itself. It is not possible to recover any TPM protected data if
there is no backup available.

Initializing TPM

1. Restart the computer.
2. Enter the PhoenixBIOS Setup Utility by pressing F2 during the POST (or press Enter and select Launch System Setup).
3. Use the arrow keys to select the Security menu.
4. Select TPM Protection and set the item to Disabled.
5. Select TPM Function and set the item to Enabled (or Clear & Enabled if you want to clear previous TPM information).
6. Press F10 to save the changed BIOS information, exit the BIOS and restart the computer.
7. Click Start > Programs/All Programs > Infineon Security Platform Solution > Manage Security Platform, or double-click the
taskbar icon , to bring up the Infineon Security Platform Initialization Wizard.
8. Click User Settings (tab), and then click Yes.
9. Click Next and select either Initialize a new Security Platform, or Restore a Security Platform from a Backup Archive, and
click Next.
10. Enter and confirm a new owner password and click Next.
11. Select the Features you want to configure and click Next.
Prestigio Aero 1214 49