Start Battery Calibration (Power Menu) - Prestigio Aero 1214 User Manual

Power Menu
Power Menu
To optimize battery life it is necessary to discharge the battery completely and recharge it again about every 30 days. This Start
Battery Calibration menu will begin this process for you. Allow some time for this process as the computer needs to charge the
battery fully, discharge it, and then charge it again.

Start Battery Calibration (Power Menu)

Press Enter to start the battery calibration process. The system will prompt you to plug-in the AC/DC adapter and will begin to
charge the battery to full capacity. Once the battery has reached full capacity you will then be prompted to remove the AC/DC
adapter with the computer left on. This will completely discharge the battery.
Once the computer has turned off the battery will be fully discharged. Plug-in the AC/DC adapter and allow the computer to fully
recharge the battery. You may work on your computer as the battery charges, however if the computer is powered on, and in use, it
will take several hours to fully recharge the battery. When the computer is turned off but plugged into an electrical outlet, battery
charge time is less. While the battery is charging the battery LED will be orange; when the battery is fully charged the LED will be
cleared.
Boot Menu
When you turn the computer on it will look for an operating system (e.g. WindowsXP) from the devices listed in this menu, and in
this priority order. If it cannot find the operating system on that device, it will try to load it from the next device in the order
specified in the Boot priority order. Item specific help on the right is available to help you move devices up and down the order.
36 Prestigio Aero 1214