Filter Service; Maintenance Service - Savant SST-W100 Deployment Manual

Filter Service

1. Press the MENU button to open the Menu Selection screen.
2. Scroll to and Select the User Settings option.
3. Scroll to and Select the Filter Service option.
4. Using the +/- buttons, set the Service Interval.
TIP! When the timer in the Filter Runtime option matches the time set in the Service Interval option, an alert is
displayed on the LCD informing the user the filter needs to be changed.
5. To reset the Filter Runtime to zero, press the Reset button.

Maintenance Service

1. Press the MENU button to open the Menu Selection screen.
2. Scroll to and Select the User Settings option.
3. Scroll to and Select the Maint Service option.
4. Using the +/- buttons, set the Service Interval.
TIP! When the accumulated time of the Heat Runtime and Cool Runtime options equal the Service Interval, an
alert is displayed on the LCD informing the user the interval set has been met and it may be time for service.
5. To reset the Heat and Cool Runtime to zero, press the Reset button.
SST-W100 Wireless Thermostat Deployment Guide
009-0802-08 | 160225
Filter Runtime - Monitors the number of
hours the furnace has run since the last time
Filter Service was reset.
Heat Runtime - Number of hours the heating
system has run since the last time Service
Interval was reset.
Cool Runtime - Number of hours the cooling
system has run since the last time Service
Interval was reset.
37 of 50
Copyright © 2016 Savant Systems, LLC