JVC KW-ADV792J Service Manual page 23

INITIALIZE ALL
NOW ...
INITIALIZE ALL
RUNNING MODE
* See "Running mode" for details.
4.6.5 Service mode 4
Keep this state more 2 seconds
while continuing pressing the
[MENU or TP/PTY] button, [VOLUME +]
button and TOUCH PANEL [DOWN]
button sequentially.
Screen indication
SERVICE MODE 4
RDS MODE
MONITOR S MODE
HD RADIO S MODE
Exchanging it operate a menu of a service mode with the [UP] button
and [DOWN] button. Operate choice of a menu with a [ENTER] button.
ERROR CLEAR
DVD ERROR CLEAR
CH ERROR CLEAR
MECHA ERROR CLEAR
BT VERSION
SW BT CORE
HW BT MODULE
SW BT MODULE
SW HIDEAWAY
ADR- ***********
INITIALIZE ALL
OK **
RDS S MODE
* RDE service mode
MONITOR S MODE *See "Monitor adjustment" for details.
R/W CHROMA CHROMA DATA read/write
DATA CLEAR Clear of CHROMA DATA (return to an initial value)
HD RADIO S MODE
* It is displayed in HD Radio unit connection.
Clear of each error history
A screen returns to following
indication after clear completion.
Bluetooth version indication
Software version of BT core
***
Hardware version of BT Module
***
Software version of BT Module
***
Software version of BT Hideaway controller
***
BT Address
INITIALIZE ALL
(Each EEPROM is initialized by a factory
shipment state.)
* Main micon EEPROM initialization
(user entry domain, error history,speaker setting,
sub area of J-version, data to pre-set )
* Panel micon EEPROM initialization
(picture adjustment data)
* DVD unit EEPROM initialization
(except a permanent domain)
* Bluetooth (Module/Hideaway)
EEPROM initialization
* After clear completion, a screen returns to normal
indication after OK indication was
displayed for three seconds.
(No.MA443<Rev.001>)1-23