No.ma443<Rev - JVC KW-ADV792J Service Manual

(7) From the top side, pull up the traverse mechanism and disengage
three dumper positions. (See Fig.6)
Dumper
(same color spring)
3.3.2 Removing the Front end board (See Fig.7)
(1) Remove the Motor wires from loading motor soldered to
TP79 and TP81 of the Front end board.
(2) Remove the two screws B attaching the Front end board.
B
Dumper
(Different color spring)
Fig.6
TP81
TP79
B
Fig.7
3.3.3 Removing the Loading arm assembly (See Fig.8)
(1) Remove the Loading arm spring L from Loading arm assembly.
(2) Slide to left side and then disengage hook a then hook b.
b
hook
3.3.4 Removing the Gear base assembly (See Fig.9, 10)
(1) Remove the Loading arm spring L. (See Fig.9)
Loading arm
spring L
Loading arm
assembly
hook
Loading arm spring L
Fig.8
Fig.9
(No.MA443<Rev.001>)1-15
a