JVC KW-ADV792J Service Manual page 13

(3) Remove the three screws T attaching the Support bracket.
(See Fig.15)
Fig.15
(4) Remove the three screws U attaching the DVD mecha-
nism. (See Fig.16)
U
U
Fig.16
3.2 Monitor section
3.2.1 Removing the Front bracket (See Fig.1)
(1) Remove the two screws A attaching the FPC cover.
(2) Remove the four screws B attaching the Front bracket.
(3) Remove the two screws C attaching the Front bracket.
T
B
3.2.2 Removing the Panel board (See Fig.2)
(1) Remove solder of hook a and straighten it.
(2) Disconnect the connector wire from LCD module connect-
ed to connector
(3) Disconnect the FPC connected to connector CN601,
CN602 and
(4) Remove the four screws D attaching the Panel board.
D
CN606
3.2.3 Removing the LCD module (See Fig.3)
(1) Remove the six screws E attaching the Panel bracket.
C
A
Fig.1
CN607 of the Panel board.
CN606 of the Panel board.
CN607
D
CN601 CN602
a
hook
Fig.2
E
Fig.3
(No.MA443<Rev.001>)1-13
B
D
D