JVC KW-ADV792J Service Manual page 11

3.1.2 Removing the Heat sink (See Fig.5)
(1) Remove the four screws C and two screws D attaching the
Heat sink.
C
C D C
3.1.3 Removing the Rear bracket (A) (See Fig.6, 7)
(1) Remove the three screws E attaching the Rear heat sink.
(See Fig.6)
(2) Remove the six screws F, two screws G, one screw H and
one screw J attaching the Rear bracket (B). (See Fig.6)
(3) Remove the one screw K attaching the Subwoofer cable.
(See Fig.6)
(4) Remove the seven screws L attaching the Rear bracket
(A). (See Fig.6)
L F J
L H G
(5) Disconnect the connector wire from FAN connected to con-
nector CN604 of the Sub board. (See Fig.7)
Fig.5
F K
E L
Fig.6
CN604
Fig.7
3.1.4 Removing the Front chassis (See Fig.8, 9)
(1) Remove the three screws M attaching the Front chassis.
(See Fig.8)
M
(2) Remove the four screws N attaching the both side of the
Front chassis. (See Fig.9)
(3) Disengage two hooks b engaged both side of the Front
chassis. (See Fig.9)
N
hook
N
3.1.5 Removing the Top chassis (See Fig.10, 11)
(1) Remove the two screws P attaching the Top chassis. (See
Fig.10)
Fig.8
b
Fig.9
P
Fig.10
(No.MA443<Rev.001>)1-11