Specific Service Instructions; Disassembly - JVC KW-ADV792J Service Manual

This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
3.1 Main body (Used figure are KW-AVX720J)
3.1.1 Removing the Front panel (See Fig.1 to 4)
(1) From the bottom side of the main body, insert the screw-
driver to hole of the third gear from hole a of the bottom
chassis, and then turn the gear to clockwise until Front
panel comes up. (See Fig.1)
(2) Remove the two screws A attaching the both side of the
Front panel. (See Fig.2)
A
1-10 (No.MA443<Rev.001>)
SECTION 2

SPECIFIC SERVICE INSTRUCTIONS

SECTION 3

DISASSEMBLY

a
hole
Fig.1
Fig.2
(3) Remove the two screws B attaching the FPC cover. (See
Fig.3)
B
Fig.3
(4) Disconnect the FPC from Front panel connected to con-
nector CN701 of the Main board. (See Fig.4)
CN701
Fig.4