Polycom SoundPoint IP 600 Configuration Manual page 26

Sample Application Configuration Guide SoundPoint IP / SoundStation IP
Note
Note
Note
3 - 4
The weather feed application is enabled by default. A 10 second refresh
interval is set by default.
If you do not want this application running on your phone, you must specifically
disable it yourself.
This section provides information on the following topics:
• Adding Postal Code/City
• Enabling/Disabling Weather Feed
• Setting Refresh Interval for Weather Feed
• Weather Feed Display
Adding Postal Code/City
This option allows you to add of a new postal code or city.
To add a new location:
1. Press the Applications key.
2. Select the Add/Delete Weather link.
3. Enter a new location as a postal code or city code.
For cities outside the United States, use the international city code, which can be
obtained from http://www.aspnetresources.com/tools/locid.aspx
4. Press the Exit soft key.
You can delete any of the current locations.
Enabling/Disabling Weather Feed
This option allows you to enable or disable the weather feed in your phone's
idle display.
To enable the weather feed on your phone:
1. Press the Applications key.
2. Select the Select Apps for Display link.
.