Port Forwarding - D-Link COVR DKT-883 User Manual

Section 4 - Con guration
Port forwarding allows you to specify a port or range of ports to open for speci c devices
on the network. This might be necessary for certain applications to connect through the
router. In the Features menu on the bar on the top of the page, click Port Forwarding.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish
to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule,
click the Add Rules button. Click Save when you are done. If you edit or create a rule, the
following options will appear:
Create New Rule
Enter a name for the rule.
Name:
Enter the IP address of the device on your local network which you
Local IP:
wish to forward tra c to. Alternatively, select the device from the
drop-down menu.
Enter the TCP ports to forward. You can enter a single port or a range of
TCP Port:
ports. Separate ports with a comma (for example: 24,1009,3000-4000).
Enter the UDP ports to forward. You can enter a single port or a range
UDP Port:
of ports. Separate ports with a comma (for example: 24,1009,3000-
4000).
Use the drop-down menu to select a schedule to apply. The schedule
Schedule:
may be set to Always Enable, or you can create your own schedules
in the Schedules section. Refer to Schedule on page 76 for more
information.
Click Save when you are done.
D-Link DIR-883 User Manual

Port Forwarding

Port Forwarding
Status Local IP TCP Port UDP Port
Name:
TCP Port:
: Always Enable
Features Management
Delete
<< Computer Name
67