Table of Contents
Advertisement
Section 4 - Con guration
Advanced Settings - Address Autocon guration Settings
Enable or disable the Automatic IPv6 Address Assignment feature.
Enable Automatic
IPv6 Address
Assignment:
Enable or disable DHCP-PD for other IPv6 routers connected to the
Enable Automatic
LAN interface. Note: This feature requires a smaller subnet pre x than
DHCP-PD in LAN:
/64 (i.e. allowing for a larger address allocation), such as /63. Contact
your ISP for more information.
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
Autocon guration
Type:
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autocon guration Type:
Enter the router address advertisement lifetime (in minutes).
Router
Advertisement
Lifetime:
If you selected Stateful DHCPv6 as the Autocon guration Type:
Enter the starting IPv6 address for the DHCP server's IPv6 assignment.
IPv6 Address
Range (Start):
Enter the ending IPv6 address for the DHCP server's IPv6 assignment.
IPv6 Address
Range (End):
Enter the IPv6 address lifetime (in minutes).
IPv6
Advertisement
Lifetime:
Click Save when you are done.
D-Link DIR-883 User Manual
Auto Detection (continued)
Enabled
Enabled
minutes
Enabled
Enabled
minutes
Enabled
minutes
39
Advertisement
Table of Contents
