Section 4 - Con guration
LAN IPv6 Address Settings
Enable or disable pre x delegation services.
Enable DHCP-PD:
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the
LAN IPv6 Address:
router.
Displays the router's LAN link-local address.
LAN IPv6 Link-
Local Address:
Advanced Settings - Address Autocon guration Settings
Enable or disable the Automatic IPv6 Address Assignment feature.
Enable Automatic
IPv6 Address
Assignment:
If DHCP-PD is available and enabled in LAN IPv6 Address Settings:
Enable or disable DHCP-PD for other IPv6 routers connected to the
Enable Automatic
LAN interface. Note: This feature requires a smaller subnet pre x than
DHCP-PD in LAN:
/64 (i.e. allowing for a larger address allocation), such as /63. Contact
your ISP for more information.
Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.
Autocon guration
Type:
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autocon guration Type:
Enter the router address advertisement lifetime (in minutes).
Router
Advertisement
Lifetime:
D-Link DIR-883 User Manual
IPv6 in IPv4 Tunnel (continued)
Enabled
Not Available
Not Available
Enabled
Enabled
minutes
Enabled
Enabled
minutes
Enabled
Enabled
minutes
48