Static Routes; Ipv4 - D-Link COVR DKT-883 User Manual

Section 4 - Con guration
The Static Routes section allows you to de ne custom routes to control how data tra c is
moved around your network.
In the Features menu on the bar on the top of the page, click Static Routes.
To con gure IPv6 rules, click IPv6 and refer to IPv6 on page 71. To return to the main
IPv4 static routes page, click IPv4.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish
to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule,
click the Add Rules button. Click Save when you are done. If you edit or create a rule, the
following options will appear:
Create New Rule
Enter a name for the rule.
Name:
Enter the IP address of packets that will take this route.
Destination
Network:
Enter the netmask of the route.
Mask:
Enter your next hop gateway to be taken if this route is used.
Gateway:
The route metric is a value from 1 to 16 that indicates the cost of using
Metric:
this route. A value 1 is the lowest cost and 15 is the highest cost.
Select the interface that the IP packet must use to transit out of the
Interface:
router when this route is used.
Click Save when you are done.
D-Link DIR-883 User Manual

Static Routes

IPv4

Static Routes
location.
Status
Name:
Metric:
Interface: WAN
Features Management
Metric Interface Delete
70