Foscam FosBaby P1 User Manual page 7

www.foscam.com
2.1.1 Soft AP Connection
1. Start camera: power on, the indicator light of camera will light on, and a short musical tone indicates
that the startup is completed.
2. Press the Soft AP button for 3-5 seconds. The indicator begins to twinkle at very high frequency.
3. Use a terminal which could search the WLAN (desktop, laptop, mobile phone, or pad. This part takes
laptop as an example.) to search for the AP named "FosBaby_******" or "FosBaby P1_******" for
connection.
4. After finishing Soft AP connection, use the web browser of the terminal to visit http://192.168.1.1:88.
5. Log in the camera ( Default username is admin with no password ). When log in for the first time, you
need to change the username and password.
Shenzhen Foscam Intelligent Technology Co., Limited
5
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168