Table of Contents
Advertisement
Check and record the following data on the device: SSID,
3
Encryption type, and key.
Compare the recorded data, the SSID on the network
4
adapter should be ANY or be the same as that on the
device. The WEP type and key on the network adapter
and device should be the same. Otherwise, you need to
change the data on the network adapter.
What to do if bridging between two devices is
unsuccessful?
Make sure that the two devices work on the same
1
channel. For details, see
Make sure that the MAC address of one device is in the
2
peer MAC address list of the other device. For details,
see "WDS".
When the signal strength is normal, what to do if
the downloading rate is low?
In this case, you need to set the value in the registry as
24
"Selecting a WLAN
Channel".
follows:
Choose Start > Run.
1
Enter regedit in the Open text box and then click OK.
2
Select parameters in the following directory:
3
\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlS
et\Services\Tcpip.
Choose Edit > New > DWORD Value.
4
Rename New Value #1 to TcpWindowSize.
5
Right-click TcpWindowSize and then select Modify.
6
Select Decimal and enter 65535 in the Value data text
7
box, and then click OK.
For the DWORD Value of DefaultRcvWindow, do the
8
same operations as that of TcpWindowSize.
Hide quick links:
Advertisement
Table of Contents
