Features Menu; Set Up Menu - Sony Trinitron KD-32NS200 E Instruction Manual

z
*Only available if 'Auto Format' is set to
'On'.

Features menu

This menu allows you to set the sleep timer and to set a signal to be output from the
AV3 socket. The table below explains each option and how to use it.
Option
Auto Format
This option can automatically detect the
type of screen format being received.
The settings available are:
Off: Screen Mode
constant.
On: Screen Mode
changes to the format being
received.
Format Correction*
When viewing 4:3 or 14:9 broadcasts
there will be dark areas visible at the
edge of the screen. The settings
available are:
Off: Dark areas remain on the TV
screen.
On: The TV automatically switches
to Smart mode, eliminating any
dark areas on the TV screen.
Sleep Timer
This option allows you to set a period of
time after which the TV switches itself
into standby mode. This can be in 10
minute intervals up to a maximum of 90
minutes.
AV3 Output
This option allows you to set which
signal source is output from the AV3
scart socket (labelled i3/r3) on the
rear of the TV. If you connect a VCR to
this socket you can
equipment connected to the other
sockets of the TV. The settings available
are:
Ana.TV: Always outputs
analogue TV signal.
Digi.TV: Always outputs the tuned digital
TV signal.
AV1: Outputs the signal
equipment connected to the
1 socket on the rear of the
TV.
AV2: Outputs the signal
equipment connected to the
2 socket on the rear of the
TV.
AV3: Outputs the signal
equipment connected to the
i3/r3 socket on the rear of
the TV.
AV4: Outputs the signal
equipment connected to the
t4/r4 socket on the front of
the TV.

Set Up menu

This menu contains advanced features that allow you to customise the TV. The
options are:
Auto Tuning
All the available channels were tuned in when the TV was first installed. The
'Auto Tuning' option in the 'Set Up' menu allows you to repeat that process (e.g.
to re-install the TV at an alternative location or search for new channels that have
been launched by broadcasters).
With the 'Auto Tuning' option highlighted, press b to select. The autotune prompt
appears on screen. Press OK to start the auto tuning process. When all
available channels have been tuned the TV returns to normal operation.
Programme Sorting
The 'Programme Sorting' option in the 'Set Up' menu allows you to change the
order in which the analogue channels are stored on the TV.
Press V or v to select Off or On. Press
OK to confirm.
remains
automatically
Press V or v to select Off or On. Press
OK to confirm.
Press V or v to select the period of time
required. Press OK to confirm.
Press V or v to select Ana.TV, Digi.TV,
AV1, AV2, AV3, or AV4. Press OK to
confirm.
record from
the tuned
from
from
from
from
Advanced Operation
Advanced Operation
How to use
27