Switching Between Digital And Analogue Modes; Finding Your Video Channel - Sony Trinitron KD-32NS200 E Instruction Manual

6
Switching between digital and analogue mode
z
*If the TV is in digital mode, an
information banner appears briefly on
screen when you change channels.
If the TV is in analogue mode, the
channel number appears in green
lettering when you change channels.
7

Finding your video channel

z
**If you wish to move your video channel
to a different programme number, refer
to the 'Manual Programme Preset'
section of this manual.
If you have connected your VCR using a
scart lead, press the t/
repeatedly on the remote control until
the picture from the tape appears on the
TV screen.
1. Press the DIGITAL/a button on the remote control to switch between
digital and analogue mode*.
If you connected a VCR to your TV when following the 'Connecting your aerial and
satellite' instructions, you now need to find your video channel.
1.
Ensure the TV is in analogue mode. If not press the DIGITAL/a button
on the remote control.
2. Press the PROG +/- buttons until the picture from your pre-recorded tape
appears on screen**.
button
Getting Started
7
Getting Started