Viewing A Traditional Text Service - Sony Trinitron KD-32NS200 E Instruction Manual

Viewing a traditional
text service
Most analogue TV channels broadcast a text service. The index page (usually page
100) provides information on how to use the service. Please ensure you are
receiving a strong signal or some text errors may occur.
Switching on the text service.
1. Press the button on the remote control to check if you are in analogue
mode. If you are watching a digital programme an Info display appears
on screen providing brief details for the current and next programme. To
change to analogue mode, press the DIGITAL/a button.
2. Select the analogue channel which carries the text service you wish to
view.
3. Press the / button on the remote control to enter Picture and Text (P&T)
mode. The screen is divided in two with the text display on the left and
the TV channel in the right corner.
Press the / button a second time to enter full screen text mode.
Press the / button a third time to enter Mix mode.
4.
Press the Numbered buttons on the remote control to enter the three
digits of the page you wish to view. Alternatively, press the * or * buttons
to view the previous or next page. After a short time the page appears on
screen.
5.
Enter more three digit numbers as required.
6. Press the DIGITAL/a button on the remote control at any time to exit text
mode.
How to use text features
Text Feature
Sub-page
Some pages contain sub-pages which
follow on automatically. This feature
allows you to directly access the
required sub-page.
Hold
This feature allows you to hold the
current page until you are ready to
proceed.
Fastext
Fastext allows you to access pages
quickly and easily. When Fastext is
available, four coloured items appear at
the bottom of the screen.
Page Catching
This feature allows you to jump quickly
from one page to another.
Basic Operation
How to use
Press the B or b button to select the
required sub-page.
Press the t/ button to hold the page
currently being displayed. Press again to
cancel.
Press the corresponding coloured button
on the remote control to access the
required page.
When viewing a page that contains
several page numbers (e.g. the index
page), press the OK button. Press the V
or v button to highlight the page number
required. Press the OK button to
confirm. Your chosen page appears on
the TV screen.
Basic Operation
11