General Characteristics - Electrolux WMD1050 Service Manual

GENERAL CHARACTERISTICS

The EWM 1000 electronic control system consists of
a single PCB, which incorporates the power, control
and display functions.
The PCB is contained in a protective casing located
behind the control panel support. Two basic versions
of the PCB are produced: one with horizontal
pushbuttons and one with vertical pushbuttons.
The EWM 1000 electronic control system may be fitted to the following appliances:
♦ front-loading washing machines manufactured in Spain (Alcalà de Henares)
♦ front-loading washing machines manufactured in Germany (Nürnberg)
♦ top-loading washing machines manufactured in France (Revin)
♦ front-loading washing machines manufactured in Italy (Porcia)
Versions with
horizontal pushbuttons
Version with vertical
pushbuttons
Number of buttons
Number of LEDs
Programme selector
Secondary selector
Buzzer
Serial port
Power supply
Type of washing
Rinsing system
Motor
Spin speed
Anti-unbalancing
system
Water fill
Detergent drawer
Control of water level in
the tub
Door safety device
Power of heating
element
Temperature control
max. 5 (4 options + start/pause)
max. 11 for version with horizontal pushbuttons
max. 15 for version with vertical pushbuttons
16 positions with main switch (incorporated in the PCB)
6 positions for horizontal version only (incorporated in the PCB)
incorporated in the PCB
DAAS-EAP communications protocol up to 38400 baud
220/240V
50/60 Hz (configurable)
traditional
with "eco-ball" sphere
Traditional
Commutator motor
600 - 1400 rpm
FUCS
1 solenoid valve with 1 inlet - 2 outlets
3 compartments: prewash/stains, wash, conditioners
4 compartments: prewash/stains, wash, conditioners, bleach
two-level pressure switch: 1st level and anti-boiling safety level (the other
levels refer to fixed-time fills)
possibility of three-level pressure switch: 1st level, anti-boiling and anti-
flooding safety levels
Traditional (with PTC)
Instantaneous
up to 1950W
NTC sensor
5
(ESA)
(DGN)
(FFH)
(ZP)