Mounting Examples - ATN PS-22 Operator's Manual

the adjusting screws until the IR beam is centered. Please remem-
ber the adjustments should be performed under night light condi-
tions only.
You can change the position of the IR control panel to meet your
your needs. The wrench that is included in the set, is used to
loosen the nut located on the body of the IR. Rotate the IR to the
desired position. Tighten the nut with the wrench to secure the
new position.

2.1.12. MOUNTING EXAMPLES

A. PS-22 WITH QRM AND TRIJICON ACOG
B. PS-22 WITH SCOPE MOUNTING SYSTEM AND
LEUPOLD CQ/T
C. PS-22 WITH QRM ON THE LONG RAIL ADAPTER
WITH LEUPOLD DAYTIME SCOPE AND IR450 ON PLATFORM RING
FIGURE 2-14. PS-22 MOUNTING EXAMPLES
2-14