Table of Contents
Advertisement
6.
Disconnect the power cable and data cable from the rear of the optical disc drive.
CAUTION:
avoid damaging the cable.
7.
Unfasten the screw securing the optical disc drive cage to the chassis.
Retain the screw.
8.
Press the both sides optical disk drive latch to release the optical disc drive cage and slide the
cage away from the edge of the chassis.
9.
Lift the optical disc drive cage out of the chassis.
12
Chapter 2 Hardware upgrades
When removing the cables, pull the tab or connector instead of the cable itself to
Advertisement
Table of Contents
