Fagor Brandt HERAKLES LA3P 001UK-0306 Manual page 30

COMPONENTS
Designation
Cycling arm
Small
shower
Upper arm inlet
Upper arm
Lower arm with or without sauce-pan nozzle
Heating tunnel
NTC
- 30 -
Function
Various spraying levels are used for
projecting the detergent solution onto the
dishes.
Ensures heating of the detergent bath for
the wash and of water with the rinsing
product before drying.
Inform the power board microprocessor on
the detergent bath temperature.
CU3P-CDC-003-02/05
LA3P-HERAKLES-001UK-0306
THE HERAKLES DISHWASHER
Technical Training
Features
The lower and intermediate winches
rotate simultaneously or not (alternate
spraying) under the action of the pressure
of the water flowing out of spray nozzles
(ports of special shape oriented in a
certain way).
The ceiling small shower: fixed, is used
for cleaning the upper section of the tub.
The lower winch: waters the main filter to
push the waste to the waste filter and
waters dishes in the lower basket.
The saucepan nozzle, which is fitted to
certain models is associated with a
specific program (Cyclone – Sauce-pans).
It is used for eliminating the stuck waste.
It is eccentric with respect to the lower-
arm centre and delivers a rotating jet.
The intermediate winch and its arm inlet
and also the product box are attached to
the upper basket.
The 2 winches are easily removable by
the consumer (for servicing) from the
inside of the tub.
Caution : do not invert winches between
models with or without alternate spraying
with those of the previous chassis.
Located out of tub (not visible), out of
bath (no clogging risks) and out of the
cycling unit (safety), it is fitted between
the hydraulic unit and the cycling pump
suction.
So, it requires less water and ensures
faster temperature rise than a system with
immersion heater.
• 220 / 240 V~
• 2040 W
25 Ω
•
• Self-resetting 98°C safety thermostat
(built-in)
• Thermal fuse at 140°C (built-in)
Its ohmic value decreases if the
temperature increases.
Ohmic value at 25°C: approx. 47 kΩ.
¼-turn rise and at vertical under the
hydraulic unit, it is above the level of the
water that may stay in the unit after
draining. An O-ring ensures sealing with
respect to the unit.