Automatic Rinsing; Circuit Rinsing; Preparing The Grinder - Krups EA829 LATT’ESPRESS Instruction Manual

Insert the steam nozzle (5).
Place a 20 oz container beneath the steam nozzle (6).
Later installations or when replacing a filter: Select the "Filter" menu by pressing PROG: "Maintenance" - OK - "Filter"-
OK - "Insert" (or change) - OK - and follow the on-screen prompts.

Automatic rinsing

When first using your machine, you may choose to activate automatic rinsing. To do this, choose the "YES" option on the
"Auto rinse" menu. Rinsing will take place each time you turn on the machine.
To modify this at a later time, you can select automatic rinsing by pressing PROG – Settings - Auto rinse.
DURING RINSING OPERATIONS, HOT WATER COMES OUT FROM THE NOZZLES. BE CAREFUL NOT TO SCALD
YOURSELF.
NEVER PUT GROUND COFFEE IN THE COFFEE CONTAINER
Use of coffee beans that are oily, caramelised or flavored is not recommended for this machine. This type of bean may damage
the machine.
Make sure that no foreign objects such as small stones among the coffee beans enter the coffee container. Any damage due to
foreign objects having entered the coffee container is not covered by the warranty. Do not put water in the coffee bean container.
To avoid staining your countertop or scalding yourself with used water, ensure you attach the drip collector tray.
Check if the water tank is clean.
First use/setting up the machine
The rotating dial enables you to select a function or increase/reduce values. Pressing this dial confirms your choice.
Switch the appliance on by pressing the "On/Off" dial (11). Follow the on-screen prompts in the "Language choice" menu.
Select a language using the rotating dial. The selected language will be highlighted (12-13).
Confirm by pressing the confirmation dial (14).
On the first use, the appliance will ask you to set a number of settings. If you unplug your appliance, you will have to reset some
of these settings.
The appliance will ask you to set:
Language
Volume unit
Date
Clock
Auto-off
Auto-on
Water hardness
Automatic rinsing
Filter
On first use, the appliance may ask for the water tank to be refilled. Simply follow the on-screen prompts.

Circuit rinsing

Coffee circuit rinsing:
You can start rinsing at any time by pressing PROG to display the menus then selecting MAINTENANCE
OK.
Steam circuit rinsing:
Install the steam nozzle (5) then place a container beneath the steam nozzle. Select the hot water recipe on the screen and
confirm. The cycle will stop automatically after the volume of water indicated on the screen has been flowed through.
It is a good idea to carry out one or more rinses of the two circuits when the appliance has not been used for a number of
days.
DURING THE RINSING OPERATIONS, HOT WATER COMES OUT OF THE NOZZLES. BE CAREFUL NOT TO SCALD
YOURSELF.

Preparing the grinder

You can adjust the strength of your coffee by setting the grind fineness of the coffee beans.
The finer the coffee is ground, the stronger and creamier the coffee will be.
Set the grind fineness by turning the dial "Grind fineness setting".
Turning towards the left means finer grinding. Turning towards the right means coarser grinding - (15).
YOU MUST ONLY CHANGE THE SETTING DURING GRINDING.
NEVER FORCE THE GRIND FINENESS SETTING DIAL.
You can select the language of your choice from those presented.
You can set the unit of measurement to ml or oz.
You can set the date.
You can select the display of a am/pm or 24-hour clock.
You can select the length of time after which your appliance will switch off automatically.
You can automatically start pre-heating of your appliance at a pre-designated time.
You must set the hardness of your water between 0 and 4. See the section "Measuring the
water hardness".
You can set rinsing to take place each time the machine is switched on.
You must indicate whether or not a filter is present (Claris - Aqua Filter System cartridge).
OK RINSING
5