Select User; User Switch' Button - Digitus Wireless 300N User Manual

'Page up'
'Prev.'
'Next'

2-8 Select User

When there're more than one connected client software, project server can
select one of them to display its display content. In the example below, there
are three connected client and none of them is in presentation mode, when ''>''
goes to the user, it becomes green, others are white:
You can use the 'User Switch' button or remote controller to select the user,
and display its display content by Presentation Server's display.

2-8-1 'User Switch' Button

A button named 'User Switch' is located at the top of Presentation Server:
Equivalent to 'Right' key on your computer's keyboard.
Select previous user (presenter) in Presentation Server's
configuration menu; Equivalent to 'Up' key on your
computer's keyboard when presentation is in progress.
Select next user (presenter) in Presentation Server's
configuration menu; Equivalent to 'Down' key on your
computer's keyboard when presentation is in progress.
Select user in Presentation Server's configuration menu.
44