Chapter II Using Presentation Server
2-1 Switch the Presentation Server On and Check IP address
When the connection between Presentation Server and external display is
established, you can switch the display's power on, then press the 'Power'
button of Presentation Server, which is located at the front of Presentation
Server.
You should be able to see the following image displayed on external display; if
not, please make sure the external display you used with Presentation Server
accepts input video resolution '1024 x 768', and horizontal refresh rate '60Hz'.
If you see above image shown on display for more than two minutes, please
press 'Power' button to switch the Presentation Server off, and then switch the
Presentation Server on again. If this still happens, refer to chapter 4-2
'Troubleshooting' for possible solutions.
20